詞語:bending
bending的同義詞
n. bend ,deflection ,deflexion
bending的解釋
bending['bendiŋ]n. 彎曲度v. 彎曲(bend的ing形式)
bending的意思
bending 波紋加工;折彎;彎曲加工;屈曲;bending machine 彎曲機;折床;撓曲機;彎機;Bending machines 彎曲機;折彎機;折彎機—;彎 ...;progressive bending 連續彎曲加工;連續彎曲;to bending 折彎;折彎 本文章來自:博研聯盟論壇;
bending的參考例句
1.Shear force is implicit in the development of bending moments. 桿中的剪力在彎矩的推導中是不明顯的。
2.The bending angle increases with an increase of the energy density. 增加能量密度,板料的彎曲角度顯著增大。
3.The bending radius reduces with increasing length of the mainstream line, and then tends to be relatively stable. 隨主流線長度增加,彎曲半徑不會無限制減小,將會趨於某一相對穩定狀態;
bending翻譯及示例
I went on walking, bending down because the roof of the cave was not very high. - 因為洞頂不是很高,我繼續彎著腰往前走。
bending的詞匯及翻譯
n. three point bending test - 三點彎曲實驗
n. three roller bending processing - 三輥彎曲加工
n. center bending type - 中彎型
n. offset bending die - 偏移彎曲模
n. inner surface bending method - 內部表面彎曲法
n. impact bending strength - 衝擊彎曲強度
n. cam bending die - 凸輪彎頭模具
n. cam bending die - 凸輪彎曲模
n. wrap bending test - 卷彎試驗
n. repeated impact bending test - 反覆衝擊彎曲試驗
n. repeated impact bending test - 反覆衝擊抗彎試驗
n. rotary bending die - 回轉彎曲模
n. rotating bending fatigue test - 回轉彎曲疲勞試驗
n. multi-pad bending dies - 多墊彎曲模
n. multi-pad bending dies - 多襯墊彎曲模
bending of the pillar bone; cervical flaccidity - 天柱倒
n. solid type bending dies - 實體彎曲模
n. offset bending die - 平移彎管模
n. bottoming bending die - 底部彎曲模
bending clasp - 彎制卡環
n. bending work - 彎曲加工
n. bending forming - 彎曲形成
bending vibration - 彎曲振動
n. bending die - 彎曲模
bending motion - 彎曲運動
bending fracture - 彎曲骨折
n. bending die - 彎模
n. bending roll - 彎軋機
bend needle; bending of needle - 彎針
n. bending work - 彎鐵工
n. hand-operated bending roll - 手動壓彎輥
n. hand-operated bending roll - 手動彎曲輥
n. draw bending machine - 拉伸彎曲機
n. solid type bending dies - 整體式彎曲模
n. rotating bending form die - 旋轉彎曲成形模
n. rotating bending fatigue test - 旋轉彎曲疲勞
n. maximum bending stress - 最大彎曲應力
n. power driven draw bending machine - 機動拉伸彎曲機
n. bottoming bending die - 校正彎曲模
n. Hamburg type mandrel tube expansion bending process - 班布爾式瑪特擴管曲加工法
n. power driven draw bending machine - 電動拉彎機
n. skin bending stress - 表面彎曲應力
n. static bending strength - 靜力彎曲強度
n. static bending strength - 靜彎曲強度